Terra Nova
Products & brands Solutions Tools Projects Blog Studio
Shortlist0
/
Discuss a project

Doors, Windows, Partitions & Façade

Brand
Đồng Tâm Window8
Application
Office8Lobby8Villa8Retail7Poolside1
8 products
Mặt dựng nhôm kính — Đồng Tâm Window, Doors, Windows, Partitions & Façade
Đồng Tâm Window

Mặt dựng nhôm kính

An aluminium-and-glass curtain wall for high-rise facades, assembled module by module so it can follow angled, irregular or heavily glazed envelopes. The build does not shrink or warp, seals reliably against water and delivers strong acoustic and thermal insulation. Dong Tam both supplies the material and carries out the installation, including complex facade geometries.
Lead time ~6-8 weeks
Cửa đi xếp trượt 3, 4, 5, 6 cánh — Đồng Tâm Window, Doors, Windows, Partitions & Façade
Đồng Tâm Window

Cửa đi xếp trượt 3, 4, 5, 6 cánh

Hệ 55, hệ 2011 (93/62)

A multi-leaf aluminium and glass door: leaves slide on a track and stack to one side, up to 7 leaves and up to 3 m in height. The 1.4 - 2.0 mm aluminium profile with twin reinforcing ribs (system 55 and system 2011 / 93-62) keeps large leaves free of torsion and running smoothly. The right choice for wide openings onto a garden, a pool deck or a terrace where the inside-outside line should disappear.
Lead time ~6-8 weeks
Cửa đi hai cánh mở quay — Đồng Tâm Window, Doors, Windows, Partitions & Façade
Đồng Tâm Window

Cửa đi hai cánh mở quay

A two-leaf hinged aluminium and glass door opening to almost 90°, with a restrictor bar to stop the leaf hitting the wall. Multi-point locking plus twin gaskets give a tight seal, good acoustic and thermal insulation, and resistance to forced entry. It uses little space in operation, which is why it is common in low-rise buildings, villas and office entrances.
Lead time ~6-8 weeks
Cửa sổ mở quay ra ngoài — Đồng Tâm Window, Doors, Windows, Partitions & Façade
Đồng Tâm Window

Cửa sổ mở quay ra ngoài

An outward-opening aluminium and glass window; the manufacturer states an opening angle of 15° - 45°, with good resistance to vibration, compression and impact. It still ventilates in bad weather, and a wind stay set at 30° is recommended to stop the leaf slamming. Suited to WC and stairwell vents, or combined with large glazed screens in high-rise and apartment buildings.
Lead time ~6-8 weeks
Cửa sổ mở hất ra ngoài — Đồng Tâm Window, Doors, Windows, Partitions & Façade
Đồng Tâm Window

Cửa sổ mở hất ra ngoài

A top-hung aluminium and glass window that pushes out between 15° and 45°, so driving rain stays outside. It resists vibration, compression and impact well; a wind stay set at 30° holds it in strong wind. Used for WC and stairwell vents, or combined with casement windows and large glazed screens in high-rise buildings.
Lead time ~6-8 weeks
Cửa sổ mở lùa — Đồng Tâm Window, Doors, Windows, Partitions & Façade
Đồng Tâm Window

Cửa sổ mở lùa

A twin-track sliding window whose leaves run sideways, so it takes no space inside or outside when operated. Leaves are easy to remove and clean, which helps in repetitive room modules that need fast maintenance. Available in uPVC or aluminium, white finish.
Lead time ~6-8 weeks
Vách kính — Đồng Tâm Window, Doors, Windows, Partitions & Façade
Đồng Tâm Window

Vách kính

An aluminium-framed glazed screen used as fixed glazing or an internal partition, admitting daylight while still insulating against noise and heat. Straightforward to fabricate and install, with surfaces that clean easily, so it works well in shared areas. Usually combined with casement or top-hung windows to provide ventilation.
Lead time ~6-8 weeks
Phụ kiện kim khí — Đồng Tâm Window, Doors, Windows, Partitions & Façade
Đồng Tâm Window

Phụ kiện kim khí

The hardware set supplied with Dong Tam Window aluminium and uPVC doors: friction hinges, 2D and 3D hinges, A-type hinges, a single-point locking bar, single or double handles, and a cylinder lock where specified. The maker also lists rollers for sliding leaves separately. Order together with the door set so operation and warranty stay aligned.
Lead time ~6-8 weeks